Phone 1300 ALSPEC1300 ALSPEC (1300 257 732)
Professionals access technical information here
Professionals access

Product Range

Comfort Thermally Broken Sliding Door

Introduction

Boost your home’s comfort and energy efficiency whilst making the most of your views and entertaining.
 
Key features:
  • A complete range of threshold and jamb in-fills as well as end caps to conceal all cavities. This not only provides a superior quality, commercial grade finish but also minimises places for insects, dirt and grit to gather
  • An internally concealed weather flap also reduces air and water infiltration and minimises insect intrusion through the drain holes
  • Utilises a strong ‘Double Strut’ thermal break construction for maximum strength in the sash
  • There is also a range of attractive interlock options to meet a wide variety of wind load requirements
  • Integrated reveal fin provision for the frame to allow various internal finishes
  • Excellent Uw values 2.1 - 3.1
  • Integrated screening options available
  • Sash features internal and external weather seals for maximum performance
  • Thermal insulation strip to minimise the transfer of heat and cold
  • Features Alspec hardware: Triser Sliding Door Mortice lock
The entire Carinya Collection has been fully tested to meet Australian Standard AS2047.

 

Triser Sliding Door Mortice Lock

The Triser Sliding Door Mortice Lock has been engineered with a low-profile design and incorporates anti-lift and anti-lock features, enhancing its durability and lifespan. The anti-lock feature protects the strike and locking mechanism from getting damaged. These locks are compatible with doors with a minimum thickness of 33mm and a maximum thickness of 45mm. The brass twin locking prongs are operated by the snib located within the flush handle. The key cylinder does not drive the lock bolt itself, but deadbolts the lock after the snib has been thrown. Its clean, minimalist look is achieved by its flush mounting tabs and concealed handle furniture.

Features:

  • Integrated anti-lock pin to prevent damage to the locking brass bolt mechanism and strike in case of accidental door shut.
  • Flush furniture design showcases its clean, minimalist design.
  • Specially designed furniture fixing prongs hold the furniture plates tightly against the aluminium section.
  • The brass locking bolt has twin locking prongs that secure door by inbuilt anti-lift feature.
  • The lock body is available in 33mm and 55mm backsets.
  • 20mm narrow-width face plate.
  • A 25mm wide retro face plate adaptor available as a spare part.
  • Alspec-designed Allen key included in each door kit to assist in furniture installation.

Read More

Classic Double Hung Window Hardware

Screening

Carinya is created by Alspec - Australia’s No.1 aluminium system supplier and we also offer an extensive range of window screening and home improvement products for your home. In addition to standard fibreglass and aluminium insect screening, your Carinya Dealer can also offer the latest technology in high visibility screening using BetterVue® and UltraVue® screening to maximise your view.

Frame Dimensions

  • Option 1: 110 x 40mm
  • Option 2 176 x 40mm

Glazing Details

  • Double Glazed: 20 – 24mm

Maximum Recommended Sizes

  • Sash Height: 2700mm
  • Sash Width: 1500mm
  • Weight: 300kg

Maximum Product Performance

  • SLS (Pa): 1200 Pa
  • ULS (Pa): 2000 Pa
  • Water (Pa): 300 Pa

Thermal Performance

  • Uw range DG 2.2 – 3.1 W/m2-K
  • SHGC range DG 0.28 – 0.61

 

Configurations

Your Carinya Dealer can offer the typical standard configurations below, as well as custom options to suit your requirements.

Comfort Thermally Broken Hinged Door

Colour Options

Depending on the look required, you have many colour options for your Carinya Windows and Doors. Your Carinya Dealer can help you through this process of selecting a perfect match for your project.

Carinya Windows and Doors can be finished in one of two options for aluminium:

Powder Coating

  • A tough and durable option allowing for a wide range of colours.
  • A choice or world-leading suppliers of powder finishes;
  • Finishing is provided by supplier-accredited Alspec branches, as well as selected quality contractors.
  • Warranties are available. Depending on your finish option, you will receive a warranty ranging from 7 years (film and colour integrity) to 15 years (film and colour integrity).

Anodising

You may prefer a choice of anodising, an electrochemical treatment available in standard finishes, natural anodised, and non-standard finishes, including bronze and black.

Colour Visualiser

Unsure which colour or finish to choose for your new Carinya product? Why not use our handy Colour Selector Tool to take the guesswork out of the process. Simply click on any of the colours or finishes you are considering to preview the results.

Colour: Monument Grey
Monument Grey
Pearl White
Paperbark Matt
Dune Satin
Primrose
Pottery
Satin Black
Stone Beige
Ultra Silver
Deep Ocean
Clear Anodised
Magnolia
Bronze Anodised
White Birch
Surfmist Matt
Notre Dame
Woodland Grey
Jasper
Paperbark
Western Red Cedar

Colour disclaimer: Actual product colours may vary from colours shown on your monitor. Colours can be verified by ordering a sample from our representative.

Energy Efficiency

Now you can install green, green glass at home - with designer style!

The Carinya Collection of aluminium-framed windows and doors has been specifically designed to be environmentally friendly, reflecting Carinya's commercial market heritage, where thermal and acoustic performance are often critical.

Of all building materials, including glass, timber and masonry, only one material is 100% recyclable - Aluminium.

Windows and doors are vital to the energy efficiency of any home. Research by the Sustainable Windows Alliance of Australia shows the typical Australian home can achieve an increase of 2 to 2.5 stars in energy efficiency simply by upgrading the windows.
Carinya Windows and Doors

Unlike many aluminium windows, Carinya has been designed for all major forms of eco-friendly glazing options without any alteration to the frame or any unsightly add-ons.

Carinya frames are designed for eco-friendly Low E glass, high thermal and high acoustic performance 10.5mm glazing. To maximise the energy efficiency of your glazing, discuss your project with a specialist Carinya Dealer and/or your architect or designer.

Remember the three most important issues for achieving maximum energy efficiency in a home are:

  • Orientation - always try and have living areas facing north with seasonal shading.
  • Insulation.
  • Window quality and performance.
 

WERS Energy Ratings

The Housing Industry Association of Australia (HIA) strongly suggests you ensure the energy rating on your windows is WERS rated to be confident of its true performance. Carinya gives you that confidence as the entire Carinya Collection has been WERS rated for performance.

WERS

WERS stands for the Window Energy Rating Scheme, which is managed by the Australian Window Association. WERS enables windows to be rated and labelled for their annual energy impact on a whole house, in any climate of Australia. WERS acts as a fair, rigorous and credible system for testing energy performance claims. It is about certified performance.

Energy rating for windows is here to stay as part of the federal government’s commitment to improving energy efficiency and reducing greenhouse gas emissions.

The flexible glazing options available in The Carinya Collection mean that our windows and doors compare favourably in WERS performance and the resale value and comfort of your home are improved by the use of the high-performance Carinya windows and doors.

View the WERS RATING results here »  ( WERS Ratings section )